Convertor industrial de la Ethernet 10/100BaseT(X) la fibra optica 10/100BaseF(X) conform cu standardele IEC 61850-3 si EN50155 .
Am inlocuit convertorul PTC-101 de la MOXA cu IMC-111. Aceeasi calitate si garantie, la un pret redus!
  
IMC-P111
IMC-P111

Prezentare pe scurt:

  • Standardele IEC 61850-3, IEEE 1613 si EN50155 pentru substatii electrice si transport feroviar;
  • 1 port10/100BaseT(X) cu auto-negociere si auto MDI/MDIX;
  • Asigura conversia Ethernet la fibra sau la slot SFP;
  • Suporta LFP (Link Fault Pass-Through);
  • Suporta modurile full/half duplex;
  • Suporta transmisie tip store and forward;
  • Alarma pe releu la intreruperea alimentarii;
  • Comutator DIP pentru alegerea setarilor;
  • Montare pe sina DIN sau wallmount;
  • Temperatura de functionare: -40 ~ 85 °C.

 

Descriere

Seria IMC-P111 este o solutie rentabila pentru conversia intre 10/100Base-T (X) si 100Base-FX, ce va permite extinderea distantei de comunicare prin fibră optică. IMC-P111 suporta detectarea automata MDI / MDIX, astfel incat nu aveti nevoie sa folositi cabluri de tip crossover.

 

Seria IMC-P111 este destinata pentru aplicatiile din substatile electrice si pentru aplicatiile feroviare (material rulant), fiind pe deplin conforme cu standardele IEC 61850-3, IEEE 1613 si EN50155.

 

Caracteristica "Link Fault Pass-Through" oferita de IMC-P111 previne o problema clasica intalnita la convertoarele media traditionale. Cand receptorul conexiunii cade, in cealalta parte a legaturii se continua transmisia pachetelor de date si apoi se asteapta un raspuns de la partea deconectata, care nu va sosi. IMC-P111 forteaza intreruperea legaturii, dand posibilitatea aplicatiei software sa reactioneze la situatia creata, rezolvand astfel problema convertoarelor clasice.

 

Cu o gama larga de temperatura de functionare (-40 ~ 85 °C) si cu alimentare de tensiune redundanta (LV sau HV), IMC-P111 este potrivit pentru medii de operare dure.

Specificatii tehnice

  IMC-P111FB-MM IMC-P111FB-SS IMC-P111P
Porturi      
Tip 10/100Base-T(X) RJ45 cu Auto MDI/MDIX
Numar porturi Ethernet 1
Tip 100Based-FX Multi-mode Port 100Based-FX Single-mode Port 100Base-FX SFP port
Numar porturi fibra optica 1 1 1
Diametrul fibrei (µm) 62.5/125 µm 9/125 µm  
50/125 µm  
Conector fibra optica SC SC  
Distanta (Km) 2 Km 30 Km  
Lungime de unda (nm) 1310 nm 1310 nm  
Puterea maxima Tx (dbm) -14 dbm -8 dbm  
Puterea minima Tx (dbm) -23.5 dbm -15 dbm  
Puterea maxima Rx (Saturatie) 0 dbm 0 dbm  
Puterea minima Rx (Sensibilitate) -31 dbm -34 dbm  
Link Budget (db) 7.5 db 19 db  
Tehnologie      
Standarde IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3x for Flow control
Procesare Store-and-Forward
Setarile DIP-Switch 1: pentru selectia modului LFP: (ON) enable / (OFF) disable
2: pentru setarea vitezei Ethernet: (ON)10Mbps / (OFF) 10/100Mbps cu auto-negociere
3: pentru selectia full/half duplex la Ethernet : (ON) Half-duplex / (OFF) Full/Half-Duplex cu auto-negociere
4: pentru selectia full/half duplex la fibra : (ON) Half-Duplex / (OFF) Full-Duplex
Indicatoare LED  
Alimentare (2 LED-uri) Verde : (ON) : alimentat / (OFF) nealimentat
Portul 10/100Base-T(X) RJ45 Verde : (ON) Link up / (Blinking) Acting / (OFF) Link down
Portocaliu : (ON) 100Mbps / (OFF) 10Mbps
Verde : (ON) Full-Duplex / (OFF) Half-Duplex
Portul 100Base-FX fiber Verde : (ON) Link up / (Flash) Acting / (OFF) Link down
Verde: (ON) Full-Duplex / (OFF) Half-Duplex
LFP Portocaliu : (ON) eroare LFP / (OFF) fara LFP
Eroare Portocaliu : (ON) eveniment neasteptat
Alimentare  
Tensiune (model LV) Alimentare tripla redundanta: doua 12~48 VDC cu conector bloc terminal cu 7 pini si 12~45 VDC cu conector tip jack
Tensiune (model HV) Alimentare redundanta: doua 100~240 VAC cu conector bloc terminal cu 8 pini
Consum 12W (model LV); 4,8W @110VAC sau 5,8W @240VAC
Protectie la supracurent Prezenta
Protectie la inversarea polaritatii Prezenta pe blocul terminal
Caracteristici mecanice  
Carcasa IP-30
Dimensiuni (W x D x H) 52 (W) x 106.1 (D) x 144.3 (H)mm (2.05 x 4.18 x 5.68 inch)
Greutate (g) 691 g (model LV) 833 g (model HV) 681 g (model LV) 823 g (model HV)
Conditii de mediu  
Temperatura de stocare -40 to 85°C (-40 to 185°F)
Temperatura de functionare -40 to 70°C (-40 to 158°F)
Umiditatea de functionare 5% to 95% Non-condensing
Aprobari  
Substatii electrice IEC 61850-3, IEEE 1613
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Socuri IEC60068-2-27
Cadere libera IEC60068-2-32
Vibratii IEC60068-2-6
Siguranta EN60950-1

 

Modele si accesorii

Modele
IMC-P111FX-MM-SC-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, 12~48VDC power inputs
IMC-P111FX-MM-SC-HV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, 100~240VAC power inputs
IMC-P111FX-MM-SC-M12-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector and 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, 12~48VDC power inputs
IMC-P111FX-MM-SC-M12-HV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector and 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, 100~240VAC power inputs
   
IMC-P111FX-SS-SC-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, 12~48VDC power inputs
IMC-P111FX-SS-SC-HV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, 100~240VAC power inputs
IMC-P111FX-SS-SC-M12-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, 12~48VDC power inputs
IMC-P111FX-SS-SC-M12-HV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, 100~240VAC power inputs
   
IMC-P111P-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX SFP socket, 12~48VDC power inputs
IMC-P111P-HV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX SFP socket, 100~240VAC power inputs
IMC-P111P-M12-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX SFP socket, 12~48VDC power inputs
IMC-P111P-M12-HV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX SFP socket, 100~240VAC power inputs